Can you seal on spiral cross section 2, 3 and 4 wire sensor cables?
Yes, Skyl-Tech, Inc. is the only company that can do this because of our low force soft seal technology. We mold the required spiral into each hole in the sealant and also include 4 integral “O” rings that conform to the 2, 3, or 4 wire cross section of the wire. Our soft seal prevents the crossing wires in the spiral from cutting into each other when the fitting is tightened to affect the seal. “Sandwich” seals used by all other companies can not seal on these wires because of the high compression forces required that will cut the insulation on the wires and cause shorts.
December 16, 2009 at 10:40 am | Uncategorized | No comment